LEV MÉS · Sizing atelier

Find your fit.

Find your measurement with a guide or enter one you already know. We will help you understand the size details of our jewellery.

You will need a measuring tape, a ruler or a soft piece of string.

Bracelets

Start with your wrist. Then consider the piece.

Illustration of a hand with a measuring tape wrapped around the wrist.
Measure against the skinSchematic illustration. Not a measuring template.
  1. Choose where it will sit

    Measure where you would like the bracelet to sit, usually just below the wrist bone. Remove any jewellery first.

  2. Read the circumference

    Place a flexible measuring tape snugly, without adding an allowance. Alternatively, mark the overlap of a paper strip and measure that distance with a ruler.

  3. Check the product measurement

    Check whether the bracelet lists an inner circumference or an open length. These measurements are not interchangeable. Compare your wrist circumference with a stated inner circumference.

Construction affects the fit

Bead size, the clasp and elasticity influence how a bracelet fits. A suitable circumference alone does not guarantee a particular fit. If only the length is given, ask us before buying.

What do the measurements mean?
Wrist circumference
Your body measurement at the desired position. Measure without adding extra centimetres.
Inner circumference
The available circumference inside the closed bracelet. Compare this measurement with your wrist.
Open length
The length of the bracelet when opened. It is not automatically the same as the inner circumference.

Place the tape without compressing the skin. This drawing illustrates the method, not a particular size.

Rings

A ring that fits is the best place to start.

Compare the inner diameterSchematic illustration. Not a measuring template.
  1. Choose a ring that fits

    Use a ring that fits the very finger on which you plan to wear the new piece. It should pass comfortably over the knuckle and stay securely in place.

  2. Measure from inner edge to inner edge

    Lay a ring that fits flat on a ruler. Measure through the centre from inner edge to inner edge, then enter the diameter in millimetres.

  3. Check the sizing system and band

    The size shown here is based on the inner circumference in millimetres. Compare it with a product size stated in the same system. Other national sizing systems and adjustment ranges are not interchangeable. Band width also affects how a ring feels.

Adjustable has its limits

Follow the confirmed details of the individual ring. Adjust the band gently, without forcing it, and avoid bending it back and forth repeatedly.

View sizing details and table

A calculated guide for a nearly circular ring band. The size is rounded to a whole number and does not confirm the fit or adjustment range of an individual ring.

Here, ring size means the inner circumference in millimetres. DE/EU refers to this circumference-based system. Other sizing systems may use a different number or a letter for the same ring.

For example: a 20 mm inner diameter gives an inner circumference of about 62.83 mm. This is approximately size 63 in this system.

Reference · circumference-based sizes 44–76
DE/EU ring sizeInner diameter (approx. mm)
4414.01
4514.32
4614.64
4714.96
4815.28
4915.6
5015.92
5116.23
5216.55
5316.87
5417.19
5517.51
5617.83
5718.14
5818.46
5918.78
6019.1
6119.42
6219.74
6320.05
6420.37
6520.69
6621.01
6721.33
6821.65
6921.96
7022.28
7122.6
7222.92
7323.24
7423.55
7523.87
7624.19

Diameters are calculated from circumference and rounded to two decimal places. Inner circumference = inner diameter × π. The table does not indicate available product sizes.

Measure through the centre, from inner edge to inner edge. Do not include the setting or the outer edge of the ring.

Necklaces

Find the length that suits you.

Try the desired length with a piece of stringSchematic illustration. Not a measuring template.
  1. Try the position you prefer

    Place a soft string loosely around your neck and bring its ends together at the desired position. Try this with the neckline you intend to wear with the piece.

  2. Measure the full distance

    Mark where the ends meet, lay the string flat and measure the whole distance between the marks. Compare the result with the stated chain length.

  3. Consider the pendant and adjustment

    Also check the pendant measurements and any stated adjustment range. Chain length and pendant height are separate measurements.

The same length can sit differently

Body shape, neckline and the pendant influence the position. Product and worn images offer a reference, but do not replace trying the length yourself.

Place the string as you would like to wear the necklace. This drawing shows a method, not a fixed position on the body.